T8730

Flow tester

The T8730 is ForTest’s equipment dedicated to flow measurement (flow-test), designed to ensure fast and accurate tests on components that require verification of air or gas passage.

Thanks to high-quality mass sensors and cutting-edge metrological resolution, it is capable of detecting obstructions or flow leaks with extreme stability.

Equipped with the “ForTest MMI” video interface and a 6.2″ capacitive touchscreen display, it offers intuitive visualization of real-time graphs and the ability to view test data statistics through CTP menus. Its comprehensive connectivity makes it perfect for integration into complex automated lines and for Industry 4.0 requirements, thanks to optional Profinet, EtherNet/IP, and EtherCAT interfaces.

Possibility to perform continuous measurement through dedicated working mode.

High-precision mass flow measurement
6.2″ color display capacitive touchscreen interface
Integrated electronic pressure regulator (optional)
Full connectivity with industrial fieldbus support
Firmware upgrade capability via USB

Specialist in flow and obstruction testing
The T8730 is designed to meet testing requirements where the critical parameter is the volume of air passing through a component. Using mass flow sensors, the equipment accurately measures flow regardless of pressure and ambient temperature variations. It is the ideal solution for testing the efficiency of ducts, valves, burners and medical devices where verification of free passage or correct flow calibration is fundamental.

6.2″ MMI video interface and touch display
The user experience is centered on the “ForTest MMI” video system, which transforms the equipment into a true analysis station. The large 6.2″ color display, protected by a capacitive tempered glass panel, allows for clear and detailed flow charts visualization. The integrated numeric keypad and intuitive interface facilitate the configuration of up to 300 test programs, making operation quick even for less experienced technicians.

Advanced measurement electronics and shielding
To ensure stable measurements in all conditions, the T8730 adopts an opto-isolated measurement section and a double Faraday cage. This architecture protects the sensors from electromagnetic interference typical of industrial environments. The measurement resolution is extremely high, allowing the detection of minimal flow variations and guaranteeing excellent test repeatability, minimizing false rejects in production.

Industry 4.0 integration and total traceability
Designed to be the heart of automated systems, the equipment offers a complete range of interfaces: USB (for data saving and updates), RS232, RS485 and Can Bus as standard. It is also prepared for the integration of advanced industrial protocols such as Profinet, EtherNet/IP and EtherCAT. Test data management enables total traceability, allowing companies to constantly monitor production quality and interface with management systems (MES).

Model	0-0,5 bar	0,5-6 bar	0-200 cc/min	0-5000 cc/min	0-10000 cc/min	0-20000 cc/min	0-50000 cc/min	0-100000 cc/min	0-200000 cc/min
Flow accuracy 1	-	-	1% RDG+0,1%FS	1% RDG+0,1%FS	1% RDG+0,1%FS	1% RDG+0,1%FS	1% RDG+0,1%FS	1% RDG+0,5%FS	1% RDG+0,5%FS
Flow measurement range 1	-	-	0-FS	0-FS	0-FS	0-FS	0-FS	0-FS	0-FS
Flow resolution	-	-	0,01 cc/min	1 cc/min	1 cc/min	1 cc/min	10 cc/min	100 cc/min	500 cc/min
Filling pressure accuracy	0,5%FS	0,5%FS	-	-	-	-	-	-	-
Filling pressure measurement range	0-FS	0-FS	-	-	-	-	-	-	-
Filling pressure resolution	0,01 mbar	0,1 mbar	-	-	-	-	-	-	-
Leak measurement accuracy in cc/’	-	-	-	-	-	-	-	-	-
Leak measurement range in cc/’	-	-	-	-	-	-	-	-	-
Leak measured measurement resolution in cc/’	-	-	-	-	-	-	-	-	-
Accuracy measure volume in cc	-	-	-	-	-	-	-	-	-
Volume range in cc	-	-	-	-	-	-	-	-	-
Volume measurement resolution in cc	-	-	-	-	-	-	-	-	-
Measure unit	mbar, bar, psi, mmHg, mmH2O, Pa, HPa, cc/min, cc/h, l/h, l/min.
Dimensions	L:270 h:160 l:300 mm
Weight	8 kg
Display size	800x280 pixel
Operating temperature range	5-40 °C
RS232 ports	2
RS485 ports	1
“Master” USB port	1
“Slave” USB port	1
Ethernet port	Optional
I/O signals	Start, Stop, Filling, Test, Good, Reject, 4BCD
Auxiliaries I/O signals (optional)	8 output programmable, 4 input programmable, 4BCD
Number of programs	300
Test archive memory	Advanced
Password block	Yes
Program name	Yes, 16 characters
Note	The resolution to be considered for accuracy is always 1 Pa. Reference Normatives: EN 61010-1, EN61326-1 / EN61326/A1, EN61000-3-2 / EN61000-3-2/A14, EN61000-3-3 / EN61000-3-3/A1, EN61000-4-2 / EN61000-4-2/A1, EN61000-4-3 / EN61000-4-3/A1 / EN61000-4-3/A2, EN61000-4-4, EN61000-4-5, EN61000-4-11, EN1779 The resolution for uncertainty calculation is 1 Pa up to 10 bar. The flow measurement of the flow meters is of mass type and referred to the reference condition of 0°C - 1013,25mbar. Flow measurement of leak test equipment is volumetric. Accuracy data are referred to and guaranteed under laboratory calibration conditions. The accuracy of the flow measurement is referred up to 2 bar, for higher pressures variations are possible depending on the characteristics of the model. For measurement scales greater than the limits indicated, the accuracy will be specified in the offer phase.

External discharge solenoid valve with filter
External start button
External start/abort push-button panel
External 4-program selection push-button panel
Start foot pedal
Barcode reader
Adhesive label for printer 4500pcs
AUX signal extension cable
Air filter
Stäubli® male connector
Precision micrometric valve
Micrometric valve
PC Software Leak Test Manager
Proprietary serial cable PC – T-Series
External temperature probe
PC Software Data Manager
Stäubli® female connector
Thermal printer with label dispenser
Thermal printer without label dispenser
AUX adapter cable T-Series – ET Series
Start/Abort/Good/Reject button
5 micron air filter

Pneumatic for fast filling – (STANDARD)
Front connector for calibrated leak Staubli©
Frontal precision pressure regulator
Electronic pressure regulator
Primary pressure auto-zero circuit
Pre-filling
Primary pressure reading on standby
Secondary reject output (third result)
Barometric measurement
Leak analog output
I/O expansion board 24 Vdc
Two-hand safety logic start input
Ethernet/TCP-IP socket
Active USB port – (STANDARD)
WI-FI connection
Connessione Bluetooth Low Energy
Remote radio control kit for program selection/start
High resolution measurement (1M pts AD) – (STANDARD)
Profinet interface
EtherNet/IP Interface
EtherCAT interface

(*) Ethernet-based interfaces with standardized industrial communication protocols are optional and not included by default in the instrument. Furthermore, depending on the availability of embedded modules that support these protocols, it is necessary to refer to the specific model and hardware revision installed, as the modules are integrated based on availability at the time of order.

Do you need a solution?

Our technical team is available to offer you personalized consultations and guide you in choosing the most suitable equipment for your production needs.

Our latest products

We have selected three key solutions for different testing requirements:

News

K7090

Differential leak testing

Patented Dual Absolute® technology
Zero maintenance
4 measurement modes
Ranges from -1 to 15 bar

News

K3060

Differential leak testing

Compact size
Differential technology
Reduced cycle times
High measurement precision

News

K3990

Absolute decay leak testing

Compact size
High connectivity
Reduced cycle times
Integrated display

T8730

Product Sheet

3D Model

Serial communication protocols

Documentazione Profinet (*)

Documentazione EtherNet/IP(*)

Documentazione EtherCAT(*)

Software

Do you need a solution?

Our latest products